Aosept Plus with HydraGlyde 360ml Twin Pack

GimmeNow

AOSept Plus

Common Uses AOSEPTTM PLUS with HydraGlydeTM Solution is intended for cleaning, disinfection, and storage of soft contact lenses (including silicone hydrogel lenses) and rigid gas permeable contact lenses.

Directions NEVER put AOSEPTTM PLUS with HydraGlydeTM Solution into your eye OR onto a contact lens immediately before inserting the lens into your eye. Otherwise, burning and stinging will result. 1. Wash your hands and dry them with a clean, lint free towel. 2. Open the lens holder marked “L”, remove your left lens and place it on the dome. Close lens holder taking care to avoid trapping your lens. 3. Repeat procedure with your right lens placing it on the dome of the other lens holder marked “R”. 4. Open the ip top cap on the AOSEPTTM PLUS with HydraGlydeTM bottle and bend it back and out of the way. 5. Thoroughly rinse the lenses in the lens holders with AOSEPTTM PLUS with HydraGlydeTM for 5 seconds (see picture 3). 6.Fill the cup with AOSEPTTM PLUS with HydraGlydeTM solution to the ll-line. DO NOT UNDERFILL OR OVERFILL (see picture 4).

Ingredients Contains: A sterile solution containing hydrogen peroxide 3%, phosphonic acid (stabiliser), sodium chloride, phosphate (bu er system), poloxamer (surfactant), HydraGlydeTM Moisture Matrix (EOBO-21TM – polyoxyethylene-polyoxybutylene), and puri ed water.

General Information AOSEPTTM^ PLUS with HydraGlydeTM Cleaning and Disinfecting Solution is intended for cleaning, disinfection, and storage of soft contact lenses (including silicone hydrogel lenses) and rigid gas permeable contact lenses.

Warnings ONLY USE THE ENCLOSED AOCUP LENS CASE. DO NOT USE ANY OTHER LENS CASE. Never put non-neutralised solution directly into the eye. Never rinse your contact lenses with AOSEPTTM PLUS with HydraGlydeTM before you put them in your eyes. Do not remove lenses from the lens case for at least 6 hours. The solution needs time to neutralise.

Product estimated dimensions:

Length 10 cm, Width 8 cm, Height 16 cm