Breath-A-Tech Anti-Static Spacer 1 Each

Priceline

Breath-A-Tech

The Breath-A-Tech® Anti-static Spacer is a hand-held, portable valved holding chamber (VHC), that is placed between a metered dose inhaler (MDI, or 'puffer') and the patient's mouth, to function as a reservoir from which an aerosol medication is dispensed in order to minimise delivery of large aerosolised particles. Intended for adults and children.

Step 1: Remove the cap from your inhaler and shake well.Step 2: Push the inhaler into the base of the Breath-A-Tech® Anti-Static Spacer.Step 3: Put the mouthpiece between the lips and make an airtight seal, depress your inhaler, you will see a fine spray inside the Breath-A-Tech® Anti-Static Spacer. Take a slow, deep breath through the mouth and hold for 5-10 seconds or continue to breathe in and out through the Breath-A-Tech® Anti-Static Spacer for 4-6 breaths.Step 4: Wait at least one minute before repeating step 3. Only use one dose from the inhaler at a time.Step 5: If a face mask is needed, attach to the Breath-A-Tech® Anti-Static Spacer. Firmly attach mask to the mouthpiece of the spacer and place mask over mouth and nose. Ensure the connection is secure at all times. Check for effective seal.

The Breath-A-Tech® Anti-Static Spacer can be used straight out of the package, then should be cleaned at least once a month but can be washed more often if needed. The Breath-A-Tech® Anti-Static Spacer can be cleaned in a dishwasher up to 70°C and up to 12 cycles.

Always refer the instructions provided with your asthma inhaler. If symptoms persist, talk to your Doctor or Healthcare Professional. The storage range is 5°C-40°C (41°F-104°F) at 15% to 95% relative humidity. Do not leave the chamber unattended with children. Before use, check for foreign objects, broken or deteriorated parts. Replace Breath-A-Tech® Anti-static Spacer immediately if any damage or missing parts are evident. For reuse by a single patient.

Product estimated dimensions:

Length 20 cm, Width 10 cm, Height 8 cm