Opti Free Replenish Twin Pack 2 x 300mL

Chemist Warehouse

OptiFree

Common Uses Alcon Contact Lens Case (Flat) is an accessory to OPTI-FREETM REPLENISHTM Solution. The lens case is a at, side-by-side well design and consists of two closures and a base with two lens well stations. OPTI-FREETM REPLENISHTM Solution and Alcon Contact Lens Case should always be used together.

Directions Thoroughly wet each side of the lens with OPTI-FREETM REPLENISHTM Solution. • Rub each side of the lens for 10 seconds (for a total rubbing time of 20 seconds). • Rinse each side of the lens for 10 seconds with a steady stream of OPTI-FREETM REPLENISHTM Solution (for a total rinsing time of 20 seconds). • Fill your Alcon Contact Lens Case with fresh OPTI-FREETM REPLENISHTM Solution. Store lenses in the closed lens case overnight or at least 6 hours. After soaking, lenses are disinfected and ready to wear. • If any debris remains on contact lenses, rinse with OPTI-FREETM REPLENISHTM Solution prior to lens insertion. You may leave your lenses in the unopened lens case containing OPTI-FREETM REPLENISHTM Solution for up to 30 days. After this time, your lenses must be cleaned and disinfected with fresh OPTI-FREETM REPLENISHTM Solution prior to wear.

Ingredients Sodium citrate, sodium chloride, sodium borate, propylene glycol, TearGlydeTM proprietary dual action reconditioning system (TETRONICTM 1304†, nonanoyl ethylenediaminetriacetic acid), POLYQUADTM (polyquaternium-1) 0.001% and ALDOXTM (myristamidopropyl dimethylamine) 0.0005% preservatives, and puri ed water.

General Information OPTI-FREETM REPLENISHTM Multi-Purpose Disinfecting Solution and Alcon Contact Lens Case (Flat). OPTI-FREETM REPLENISHTM Solution is a sterile, bu ered, aqueous solution containing sodium citrate, sodium chloride, sodium borate, propylene glycol, TearGlydeTM proprietary dual action reconditioning system (TETRONICTM 1304†, nonanoyl ethylenediaminetriacetic acid) with POLYQUADTM (polyquaternium-1) 0.001% and ALDOXTM (myristamidopropyl dimethylamine) 0.0005% preservatives, and puri ed water. The Alcon Contact Lens Case (Flat) is an accessory to OPTI-FREETM REPLENISHTM Solution. The lens case is a at, side-by-side well design and consists of two closures and a base with two lens well stations. OPTI-FREETM REPLENISHTM Solution and Alcon Contact Lens Case should always be used together.

Warnings It is essential that you follow your eye care professional’s directions and all labelling instructions for proper use and care of your lenses and lens care products, including the lens case. Do not reuse or “top o ” solution in the lens case since this may reduce e ective lens disinfection. Eye problems, including an infection (serious microbial infection) or corneal ulcers, can develop rapidly and lead to loss of vision. If you experience persistent eye discomfort, excessive tearing, redness of the eye (irritation, allergic response), or vision changes (decreased vision), IMMEDIATELY remove your lenses and consult your eye care professional as the problem could become more serious.

Product estimated dimensions:

Length 15 cm, Width 10 cm, Height 6 cm